Moisture: How to prevent doors from warping

Avoid Warping of Doors: Options, Tips and Solutions


Moisture is one of the most challenging issues that can affect door appearance. If you apply the correct finish treatment, your doors might be able to stay as neat as the day they were installed. Some doors might dry depending on the environment in which they are installed, as the moisture inside them evaporate when they are installed at drier places, and so the door will shrink and warp.

However, there is always something you can do to prevent that from happening.

door-warpingAvoid Door Warping: The Cause Behind It

There will be times that as opposed as described above, the door will be installed at a more humid location causing additional problems such as swelling and warping issues too.  During winter, many builder will be asked for warranty issues as the doors will warp when the furnace is running, so it dries out the moisture out of the air affecting the moisture content of your door. Also when the door is finished on only one side or has different finishes on both sides, then the door might start to warp.


Avoid Door Warping: Things to Do

Now that you know why doors warp, let’s work together to find a solution to this problem. Start by storing the doors in the same environment and if possible at the same room in which they will be installed for about 36 hours before installing them.

Lay the door as flat as possible and apply two coats of finish over all the door’s six edges. Do not save money by applying only one coat as it would not be enough and the door might warp eventually. Be sure to apply the two coats over the top and bottom potions of the doors, as these might be the most critical or the place that would be more exposed to humidity.

Strictly follow manufacturers recommendations on how to apply these two coats. Remember that a wood sealer will not keep out the moisture.

Avoid Door Warping: Applying the Coat

The first step before applying the coat is to lay them down on flat surface. Provide multiple support to your doors to avoid curvatures on the door. When the door is not properly supported the actual moisture content of the coating will make the door to take the shape of the position the door is actually supported.  Do not lean the door against a surface as it might bow to, having you with a useless door that will eventually will not fit. Remember to apply the same coating to all 6 sides of the door to reduce the probability of warping, not only once but twice.


Avoid Door Warping: Helpful Hints

These additional tips will prevent your door from warping:

  • Taller doors are more susceptible to warping than shorter doors.
  • Do not adjust your door when the weather is about to change. Changes in temperature will increase the probability of warping.
  • Install a cover over the doorway.
  • Polish the door twice a year.
  • If you are choosing the type of door that you want to use, consider using a fiberglassone instead of a wood door.
  • Use polyurethane sealant to protect your door.
  • Try to get a door that is weather resistant and that can withstand temperature variations.


Are There Doors that Won’t Warp?

The answer is yes. There are many products or door options that will not warp when exposed to humidity changes. A common door, if manufactured properly, can be design so the warping effect might be addressed by the way it is assembled. A door can have vertical rails made out of two separate pieces of wood, that are laminated together with the grain running in different directions. The stile needs to be assembled the same way so when the moisture gets into the door, it will bow in opposite directions cancelling the warping effect. Steel, Aluminum and fiberglass doors will not warp making it ideal in some instances to have them installed.


Source – The Balance


To request a damp assessment, click here.